Overview of Voodoo Power 2 Plus
Voodoo Power 2 Plus is a pedal‑powered USB audio interface from Voodoo Lab, a Digital Music Corp brand It delivers 48 V phantom power UL 60065, CSA C22.2 No. 60065 certified Trademarked by Digital Music Corp.
Product Description and Key Features
The Voodoo Power 2 Plus is a pedal‑powered USB audio interface that delivers 48 V phantom power to microphones. It is a unit that plugs into a standard 120 V mains outlet. The device is UL 60065 and CSA C22.2 No. 60065 certified, ensuring compliance with North American safety standards. Key features include a single 48 V phantom power switch, a 3‑pole grounding plug, and a built‑in USB‑A port for connection to a computer. The unit is powered solely by the pedal’s internal battery, allowing it to be used in remote or mobile setups without a separate power supply. The design incorporates a dry‑cloth‑cleanable surface, a ventilation slot, a reinforced power cord to prevent damage from accidental tripping. The product is registered under the Voodoo Lab and Pedal Power trademarks of Digital Music Corp, and the manual emphasizes careful handling of the power cord and connectors to maintain safety and longevity.
Always consult the full manual before use and heed all safety warnings for reliable operation daily.
Manufacturer and Trademark Information
Voodoo Power 2 Plus is manufactured by Voodoo Lab, a brand of Digital Music Corporation. The device carries the Voodoo Lab and Pedal Power trademarks, registered with the U.S. Patent and Trademark Office. Digital Music Corp holds ©1998‑2018 copyright for the design and documentation. The unit’s serial label displays the manufacturer’s name and trademark logos. All marketing materials, user manuals, and firmware updates are stamped with the Voodoo Lab logo and Pedal Power name to confirm authenticity. Trademarks are protected under U.S. and international law, and unauthorized use of the names or logos is prohibited. Warranty claims or service requests must be directed to authorized Voodoo Lab distributors or the Digital Music Corp service network. The company maintains a dedicated support portal offering firmware downloads, troubleshooting guides, and a list of certified repair centers worldwide. All product documentation is available in format on the Voodoo Lab website, providing users with firmware updates.
Safety and Compliance
The Voodoo Power 2 Plus meets all relevant safety standards for consumer electronics. It is built for safe operation, requiring a grounded outlet, and must remain dry and away from heat sources and keep it dry!!!..
UL and CSA Certification Details
The Voodoo Power 2 Plus complies with the UL 60065 standard for electronic equipment and is certified to CSA C22.2 No. 60065, ensuring it meets North American safety requirements for electrical devices. This certification confirms that the unit has undergone rigorous testing for electrical safety, fire resistance, and proper grounding. The UL and CSA approvals indicate that the product’s design, construction, and materials meet strict criteria for safe operation in residential, commercial, and studio environments. Users can rely on the device’s compliance to reduce the risk of electrical shock, overheating, or fire hazards. The certifications also mean that the product is approved for use in regions where UL and CSA standards are mandatory, providing peace of mind for musicians and audio professionals worldwide. For detailed test reports and certification documents, please refer to the manufacturer’s documentation or contact Voodoo Lab’s support team. All certifications are for the product’s lifetime and ensure compliance with worldwide safety standards globally!!!.
Electrical Safety Precautions
To ensure safe operation, follow these precautions: keep the unit dry; do not expose it to rain, moisture, or water. Do not place it near heat sources such as radiators, stoves, or amplifiers that emit heat. Keep ventilation openings unobstructed and avoid blocking them. Use only the supplied grounding‑type plug; do not defeat its safety purpose. Protect the power cord from being walked on or pinched, especially at plugs and where it exits the unit. Use only accessories specified by the manufacturer. Unplug the device during lightning storms or when it will remain unused for extended periods. Refer all servicing to qualified professionals. These steps reduce the risk of fire, electric shock, and equipment damage. Additionally, avoid placing the unit on surfaces that could trap heat, and ensure the power cord is routed away from traffic areas to prevent wear. Never attempt to modify the plug or cord, and always verify that the outlet is grounded before connecting. In case of any fault, unplug and consult a certified technician. Maintaining these precautions ensures reliable performance and extends the lifespan of the device.
The Voodoo Power 2 Plus is a pedal‑powered USB audio interface from Voodoo Lab, a Digital Music Corp brand. It delivers 48 V phantom power UL 60065, CSA C22.2 No. 60065 certified. The unit is registered under the Voodoo Lab and Pedal Power trademarks of Digital Music Corp, providing reliable power for guitar and bass pedals in live and studio settings.
Water and Heat Exposure Guidelines
To safeguard the Voodoo Power 2 Plus and maintain optimal performance, strictly avoid any contact with water or moisture. Never place the unit in damp environments, and refrain from using it near sinks, showers, or other water sources. Keep the device away from direct rain or splashes, and do not leave it exposed during inclement weather. Additionally, the unit must not be positioned close to heat‑producing equipment such as radiators, heat registers, stoves, or amplifiers that emit significant warmth. Maintain adequate ventilation by keeping all openings unobstructed; do not block or cover the vents. If the unit is left unused for extended periods, unplug it to reduce the risk of electrical hazards. Follow these precautions to protect the equipment and ensure safe operation.
Never leave the unit unattended in humid or dusty environments, as moisture accumulation can damage internal components. Store the device in a dry, well‑ventilated area when not in use. Keep unit in a controlled temperature.
Installation Instructions
Connect the Voodoo Power 2 Plus to a grounded outlet, ensuring the plug fits. Place the unit on a stable surface, away from heat sources and moisture. Follow cable routing and ventilation. Unplug during storms now
Before powering the Voodoo Power 2 Plus, ensure the outlet is properly grounded and meets UL 60065 and CSA C22.2 No. 60065 standards. Verify the three‑prong plug fits securely; if it does not, consult an electrician to replace the outlet. The power cord should be free of damage and routed away from high‑traffic areas to prevent tripping or pinching. Avoid placing the unit near heat sources such as radiators, stoves, or amplifiers that generate excess heat. Keep the device away from moisture; do not expose it to rain or any liquid. When installing, read all safety instructions, keep the manual nearby, and follow each step carefully. Unplug the unit during lightning storms or when not in use for extended periods. Additionally, ensure the power supply is stable, with no voltage spikes, and that the cord’s insulation is intact. Check that the outlet’s grounding prong is not bent or corroded, as a poor connection can lead to dangerous voltage leakage. Finally, label the unit’s power status for quick reference during maintenance or troubleshooting. All plugs secure, no loose!! OK
Connecting the Power Cord
To connect the Voodoo Power 2 Plus, first locate the three‑prong power cord that comes with the unit. Insert the plug into a grounded mains outlet that complies with UL 60065 and CSA C22.2 No. 60065 standards. Do not force plug—if it does not fit, have an electrician replace outlet. Once inserted, verify that the cord’s insulation shows no cuts or frays; a damaged cord may short or spark. Avoid twisting the cord near the plug; keep it straight to prevent strain on the internal conductors. Route the cord away from high‑traffic areas to reduce the risk of tripping or pinching. After the plug is secure, check that the unit’s power switch is in the OFF position before powering on. Finally, label the cord’s connection point for quick reference during maintenance or future troubleshooting. This procedure ensures safe, reliable operation while protecting both the device and the user. The cable length is 25 ft; do not exceed this length to maintain signal integrity. Keep the cord away from heat sources and avoid placing it under heavy objects. Keep cord ends no water. Stay safe!!
Ventilation and Placement Considerations
Position the Voodoo Power 2 Plus on a stable, dry surface with at least 12 inches of clearance on all sides to allow proper airflow. The unit’s ventilation slots are located on the rear panel; do not block them with cables, cases, or other equipment. Place the device away from direct sunlight, radiators, or any heat source that could raise its operating temperature beyond the specified limits. Avoid stacking heavy objects on top of the unit, as this can impede ventilation and cause overheating. Keep the area around the unit free of dust and debris; a clean environment reduces the risk of dust accumulation in the vents, which can impair cooling. If the unit is used in a studio with other electronics, ensure that the combined heat load does not exceed the recommended ambient temperature of 32 °C (90 °F). Regularly inspect the ventilation openings for obstructions and clean them with a dry brush if necessary. Proper placement and ventilation are essential for maintaining the device’s performance and extending its lifespan. Place on surface, keep cables.
Operation and Maintenance
Use the pedal power 2 plus by connecting it to a grounded outlet. Keep the unit dry, clean with a dry cloth, avoid blocking vents, and handle the power cord to prevent damage. Store it in dry place when not in use.
Using the Pedal Power 2 Plus
The Pedal Power 2 Plus provides a convenient, pedal‑controlled source of 48 V phantom power for microphones and line‑level instruments. To operate, simply press the pedal to engage the power switch; the LED indicator will light, confirming that the unit is supplying power. The device is designed to be used with a grounded mains outlet; the built‑in three‑prong plug ensures safety compliance with UL 60065 and CSA C22.2 No. 60065. When the pedal is released, the power is cut off, protecting your gear from accidental over‑voltage. The unit’s compact size allows it to be mounted on a pedalboard or placed beside a laptop, and its low‑profile design keeps it out of the way of other equipment. For optimal performance, keep the unit dry, avoid placing it near heat sources, and ensure the power cord is free from damage. The Pedal Power 2 Plus is a reliable, portable solution for musicians and producers who need quick, on‑the‑go phantom power without the bulk of a traditional power supply. Its design is quick and suits live rigs?!
Cleaning and Care Procedures
To keep the Pedal Power 2 Plus in optimal condition, use a dry, lint‑free cloth to wipe the exterior after each use. Avoid spraying liquids or using abrasive cleaners, as moisture can damage internal components. Do not disassemble the unit; only qualified service personnel may open the chassis. When cleaning the power cord, inspect for fraying or cuts; replace if damaged. Store the device in a dry, cool environment, away from direct sunlight and heat sources. Keep the ventilation openings clear of dust or debris; a soft brush can remove accumulated lint. For long‑term storage, disconnect the power cord and place the unit in a protective case. Regularly inspect the grounding prong and plug for corrosion; clean with a dry brush if necessary. Follow the manufacturer’s safety instructions and do not expose the unit to water or high humidity. Proper care extends the life of the Pedal Power 2 Plus and ensures reliable phantom power delivery. This unit is ideal for studio and stage use, providing clean, stable power for all your audio gear. Keep it and away from heat for longevity!
Handling Power Cord and Connectors
Handle the Pedal Power 2 Plus power cord with care. Never pull the plug by the cord; pull by the plug itself to avoid strain on the connector. Inspect the cord for cuts, frays, or exposed wire; replace immediately if damaged. Keep the plug and receptacle clean and dry; moisture can short the circuit. Do not bend the cord at sharp angles; maintain a gentle curve to preserve internal insulation. When connecting, ensure the three‑prong grounding pin is fully inserted into a grounded outlet; this protects against electric shock. Avoid placing the cord under rugs or heavy objects that could crush it. Store the cord coiled loosely, not tightly wound, to prevent kinks. If the cord becomes loose or the connector loosens, tighten the screw on the connector housing. Do not use extension cords or power strips that lack grounding. Follow all safety warnings in the manual. Remember that the power cord’s insulation is rated for 250 V, and the connector’s strain relief should be inspected annually to ensure no wear or deformation!!
Warranty and Service
Voodoo Power 2 Plus comes with a 2‑year limited warranty covering manufacturing defects. Repairs must be performed by authorized Voodoo Lab service centers. Contact support for service requests. for all users.!!!??
Warranty Coverage Details
The Voodoo Power 2 Plus is backed by a two‑year limited warranty that covers manufacturing defects and defects in workmanship. The warranty is valid only from the date of purchase and applies to the original purchaser. It does not cover damage caused by misuse, accidental damage, or unauthorized modifications. The warranty covers repair or replacement of defective components at no cost to the customer. All warranty claims must be submitted to an authorized Voodoo Lab service center with proof of purchase. The manufacturer reserves the right to repair, replace, or refund the product at its discretion. The warranty does not cover loss of data or software. The warranty is void if the product has been altered, repaired by an unauthorized party, or used in a non‑approved environment. The warranty is non‑transferable and is only valid for the original user. The warranty period begins on the date of purchase and ends two years later. The warranty is subject to the terms and conditions set forth in the official user manual the Digital Music Corp terms of service.
Authorized Service Centers
All Voodoo Power 2 Plus units are supported by a global network of authorized service centers. The primary provider is Voodoo Lab’s official support portal, offering a searchable database of certified technicians and repair facilities. Customers can locate a local center by entering their postal code or city name on the portal’s “Service Locator” page. In North America, authorized centers include: • Voodoo Lab Service Center – 123 Music Ave, Nashville, TN 37215 • AudioTech Repair – 456 Sound Blvd, Los Angeles, CA 90001. For regions not listed, customers should contact Voodoo Lab support for guidance on the nearest authorized technician. All repairs must be performed by certified technicians using genuine parts. The agreement includes a 30‑day return window for parts that fail to resolve the issue. Customers should retain the receipt and warranty card when submitting a unit for repair.now!!!